NEWARE battery tester software glossary-Battery test

HOME Glossary Software

Glossary

Hardware Module

Product Features

Product Parameters

Recording condition

Conditions for data recording.
Subsection record

According to certain conditions, the recording conditions are set separately.
Cyclic accumulation

The capacity of the same step will be accumulated.
Automatic backup

The software/system saves the tested data into a specified directory automatically according to the set conditions.
Fading rate

The discharge capacity of a certain cycle is set as the standard, and the decay rate is obtained by comparing each subsequent cycle with the standard cycle.
Copy channel

Copy the steps of one channel to other channels.
Channel information

The details of the selected channel.
Battery internal resistance

The resistance of the battery itself.
Capacity accumulation

Accumulate the capacity of continuous charge or discharge (exclude rest step) steps.
Nominal capacity

The released capacity of a battery when it is discharged from full state to the termination voltage.
Nominal specific capacity

The nominal capacity per unit mass/volume.
Depth of discharge (DOD)

The percentage of released capacity by the battery to its rated capacity.
State of charge (SOC)

It is used to reflect the current capacity of the battery and can be expressed as percentage ratio of the current capacity and rated capacity
Plateau capacity

The corresponding capacity value when the voltage reaches the set plateau voltage.
Plateau time

The corresponding time when the voltage reaches the set plateau voltage.
Active material

The cathode/anode material, which attends the current formation reaction (electrochemical reaction process).
Current upper limit

The channel will be protected when the current of the present step is greater than or equal to the set value
Current lower limit

The channel will be protected when the current of the present step is less than or equal to the set value.
Voltage upper limit

The channel will be protected when the present step voltage is greater than or equal to the value set by the upper voltage limit.
Voltage lower limit

The channel will be protected when the present step voltage is less than or equal to the value set by the upper voltage limit.
Press upper limit

The channel will be protected when the press of the present step is greater than or equal to the set value.
Press lower limit

The channel will be protected when the press of the present step is less than or equal to the set value.
Capacity upper limit protection

The channel will be protected when the capacity of the present step is greater than or equal to the set value.
Expression

A formula consisting of numbers, operators, and variables.

NEWARE and Cookies

We use Cookie to personalize and improve your experience with our website. By continuing to browse the site you are agreeing to our use of cookies.